Firmware info

---

Added optional Enable High Pass filter to both renaming and audio convert only routines.

Automatically apply 40 sample fade-in and fade-out to front and end of wavs to prevent clicking.

Automatically scroll to bottom to reveal Download button when ready.

Fixed optimization checkbox hover tips. 

https://www.soundfontnamingconverter.com/ https://buymeacoffee.com/brianconner

video instructions  https://youtu.be/qtINPjJUPKQ 

ANDROID XENO USER CAN NOW UPDATE

PSA XENOV3 firmware version v1.3.3 is now out 

if you update this is the current firmware on the app. please note

 V1.3.3 update changelog

• 1. App GUI updated home screen crystal now matches active blade color
• 2. Fixed fast font change crash bug 
• 3. Fixed select color crash bug
• 4. Fixed bug of the pogo pin led light up when blade off

for manual none app users follow the below instructions 

click the link below

https://drive.google.com/file/d/12Kw4OD1DMbKom3zNGYxXxE6nMNSF3v0D/view?usp=drive_link

***PLEASE NOTE WE NOR ANY VENDOR WILL PROVIDE FILES OF FONTS IF YOU DID NOT PURCHASE FROM US OR THEM IF YOU LOSE YOUR FILES CONTACT YOJR PURCHASED VENDOR FOR THEM WE WILL NOT SHARE SOUND FONTS NOT PURCHASED WITH A XENO PRODUCT. 

ANDROID XENO USER CAN NOW UPDATE

PSA XENOV3 firmware version v1.3.1 is now out 

if you update this is the current firmware on the app. please not when updating the RGB VERSIONS to click 1st on the firmware page RGB (bottom in app) then choose 1 button rgb then saber will reboot (reconnect) then click firmware update, so it loads the proper firmware.  this doesn't need to be done for PIXEL versions.

for manual none app users follow the below instructions 

click the link below

 https://drive.google.com/file/d/1sx_MpuK1awoG2lOevoDBZSG0csI87InO/view?usp=drive_link 

below are the new changes 

see change log: 

V1.3.1 Update Summary

1, Added a new "knock/poke" action detection algorithm to achieve automatic triggering of sword dragging or stabbing effects by poking the ground, automatic triggering of melting effects by poking the wall, and a light wave to cancel the function; light wave to cancel the locked state is compatible with function customization.

2, New press and hold the main button to trigger the sword effect, let go to cancel the function.

3, New press and hold the main button blade up, first left and then right rotation trigger force lightning block effect, let go cancel function.

4, Stab effect and push away the sword to add mutual exclusion.

5. Optimizing the effect of stabbing and the conflict problem of pull-off sword detection, and the trigger sensitivity of stabbing is related to the pull-off sword sensitivity.

6. Optimize the value and adjustable range of APP tapping sensitivity (affecting the trigger difficulty of poking, downward stabbing, tapping and melting);

7, enter / exit battle mode to open sword state do a long press of the main button 500ms trigger.

8, Combat mode and blocking mode can coexist. In these two lock modes, you can also close the sword normally (only by holding down the main button), and the relevant lock mode switch status will still be retained after closing the sword.

9. Fixed the forced shutdown problem caused by the operation that requires holding down the main button to maintain the effect.

10, Redo the sword dragging light effect to make it more prominent and obvious

***PLEASE NOTE WE NOR ANY VENDOR WILL PROVIDE FILES OF FONTS IF YOU DID NOT PURCHASE FROM US OR THEM IF YOU LOSE YOUR FILES CONTACT YOJR PURCHASED VENDOR FOR THEM WE WILL NOT SHARE SOUND FONTS NOT PURCHASED WITH A XENO PRODUCT. 

ANDROID XENO USER CAN NOW UPDATE

New functions and customization have been added

- ability to upload to saber via mobile device see details in pdf file below 

- ability to record new wav files and convert to saber sound files

- ability to change default functions of your choosing

- ability to now have Battery level  voice indicator on saber see customization feature to adjust

Recommended to upgrade via app for proper sync

for manual none app users follow the below instructions 

click the link below

https://drive.google.com/file/d/1XCLbfB1udBdgfFUpj2qeeCgxjJms5s0h/view?usp=sharing

once you download do the following in order

- Unzip file and click on folder

- open it in a separate window 

- if you dont have any modification made copy each folders  (fontconfig.ini) to match the folders in your sd card

- next click on the setting folder and add the 3x files located there to the setting folder of your sd card and override the current sd card files. 

once completed reload battery or hold power down button to reboot and upgrade. 

***PLEASE NOTE WE NOR ANY VENDOR WILL PROVIDE FILES  OF FONTS IF YOU DID NOT PURCHASE FROM US OR THEM IF YOU LOSE YOUR FILES CONTACT YOJR PURCHASED VENDOR FOR THEM WE WILL NOT SHARE SOUND FONTS NOT PURCHASED WITH A XNO PRODUCT. 

latest firmware bug fix stable must update to v1.2.0 first then proceed to update to v1.2.5 if firmware is below v1.2.0

* Stabilizes blade effects

* Improves sound quality and custom fonts

+added save state

do not factory reset. download file and add to the setting folder overwrite any file you have there for update.bin finally remove battery and let the update run.  you can also update via the app xeno configurator. this is for manual upload.

link below

https://drive.google.com/file/d/1YXIgLof3wgHqQuQxnCe_6_2SUSv-aFG4/view?usp=drive_link

latest firmware bug fix stable must update to v1.2.0 first then proceed to update to v1.2.5

* Stabilizes blade effects

* Improves sound quality and custom fonts

do not factory reset. download file and add to the setting folder overwrite any file you have there for update.bin finally remove battery and let the update run.  you can also update via the app xeno configurator. this is for manual upload.

link below

https://drive.google.com/file/d/1eEOeWdha-X9CoaVjZGQ1Qer82pZ-I2CC/view?usp=drive_link

below is a list of files supported on the xeno3rgb and pixel sound board ensure it's in this format? and that all files are included in the .font.txt for proper reading?

begindrag (1).wav

beginlock (1).wav

beginmelt (1).wav

blaster (1).wav

clash (1).wav

drag (1).wav

enddrag (1).wav

endlock (1).wav

endmelt (1).wav

font (1).wav

force (1).wav

hum (1).wav

in (1).wav

lock (1).wav

melt (1).wav

out (1).wav

spin (1).wav

stab (1).wav

swing (1).wav

swingh (1).wav

swingl (1).wav

track (1).wav

lightningblock (1).wav

preon (1).wav

postoff (1).wav

prein (1).wav

sideout (1).wav

beginlightingblock (1).wav

endlightingblock (1).wav

Download and replace the melt files in each folder of your board 

Link below

https://drive.google.com/file/d/1fuZseZxnncL0crbIvQLRukYsJQwLN9Ai/view?usp=sharing

Copy these files to each folder if dont have them to activate lightining block feature

Link below 

https://drive.google.com/file/d/1E1pqllBc7EsF3Vb2znG_c-g3YnuNIncQ/view?usp=drive_link

This update helps with the rgb board version  bug where leds get stuck or you had uploaded manually wrong firmware add file to setting folder and reboot

https://drive.google.com/file/d/15WJE-p-KEZhW_YfDXjl_E6CWAJ9IGxAv/view?usp=drivesdk

Update now avaliable for download on the bluetooth xeno configurator app 

Regarding the Xenov3 pixel only update v1.2.0 on the app below is the bugs and new togglez/addon its not a major update but address few prior exisiting bugs 

- adding ability to solder 2 buttons (on rgb also)

- toggle on or off bluetooth function (on rgb also)

- added ability for smoothswing sensitivity adjustment (rgb also)

- added ability to wire a motor crystal chamber (rgb also)

- fixed the config.tmp major bug (rgb also)

- added Deep Sleep Time adjustment  (rgb also)

- added pixel to rgb toggle 

Image image for wiring rotating crystal motor 

XENO3RGB

https://drive.google.com/file/d/14qTmQ7iWgJTiRGrA6le2K7zzQl5YiUi5/view?usp=drive_link

XENO3PIXEL

https://drive.google.com/file/d/1C6rs5xZW2U2rNB8yrgE-ZhePHClfpo5z/view?usp=drive_link