Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
ANDROID XENO USER CAN NOW UPDATE
PSA XENOV3 firmware version v1.3.3 is now out
if you update this is the current firmware on the app. please note
V1.3.3 update changelog
for manual none app users follow the below instructions
click the link below
https://drive.google.com/file/d/12Kw4OD1DMbKom3zNGYxXxE6nMNSF3v0D/view?usp=drive_link
***PLEASE NOTE WE NOR ANY VENDOR WILL PROVIDE FILES OF FONTS IF YOU DID NOT PURCHASE FROM US OR THEM IF YOU LOSE YOUR FILES CONTACT YOJR PURCHASED VENDOR FOR THEM WE WILL NOT SHARE SOUND FONTS NOT PURCHASED WITH A XENO PRODUCT.
ANDROID XENO USER CAN NOW UPDATE
PSA XENOV3 firmware version v1.3.1 is now out
if you update this is the current firmware on the app. please not when updating the RGB VERSIONS to click 1st on the firmware page RGB (bottom in app) then choose 1 button rgb then saber will reboot (reconnect) then click firmware update, so it loads the proper firmware. this doesn't need to be done for PIXEL versions.
for manual none app users follow the below instructions
click the link below
https://drive.google.com/file/d/1sx_MpuK1awoG2lOevoDBZSG0csI87InO/view?usp=drive_link
below are the new changes
see change log:
V1.3.1 Update Summary
1, Added a new "knock/poke" action detection algorithm to achieve automatic triggering of sword dragging or stabbing effects by poking the ground, automatic triggering of melting effects by poking the wall, and a light wave to cancel the function; light wave to cancel the locked state is compatible with function customization.
2, New press and hold the main button to trigger the sword effect, let go to cancel the function.
3, New press and hold the main button blade up, first left and then right rotation trigger force lightning block effect, let go cancel function.
4, Stab effect and push away the sword to add mutual exclusion.
5. Optimizing the effect of stabbing and the conflict problem of pull-off sword detection, and the trigger sensitivity of stabbing is related to the pull-off sword sensitivity.
6. Optimize the value and adjustable range of APP tapping sensitivity (affecting the trigger difficulty of poking, downward stabbing, tapping and melting);
7, enter / exit battle mode to open sword state do a long press of the main button 500ms trigger.
8, Combat mode and blocking mode can coexist. In these two lock modes, you can also close the sword normally (only by holding down the main button), and the relevant lock mode switch status will still be retained after closing the sword.
9. Fixed the forced shutdown problem caused by the operation that requires holding down the main button to maintain the effect.
10, Redo the sword dragging light effect to make it more prominent and obvious
***PLEASE NOTE WE NOR ANY VENDOR WILL PROVIDE FILES OF FONTS IF YOU DID NOT PURCHASE FROM US OR THEM IF YOU LOSE YOUR FILES CONTACT YOJR PURCHASED VENDOR FOR THEM WE WILL NOT SHARE SOUND FONTS NOT PURCHASED WITH A XENO PRODUCT.
ANDROID XENO USER CAN NOW UPDATE
New functions and customization have been added
- ability to upload to saber via mobile device see details in pdf file below
- ability to record new wav files and convert to saber sound files
- ability to change default functions of your choosing
- ability to now have Battery level voice indicator on saber see customization feature to adjust
Recommended to upgrade via app for proper sync
for manual none app users follow the below instructions
click the link below
https://drive.google.com/file/d/1XCLbfB1udBdgfFUpj2qeeCgxjJms5s0h/view?usp=sharing
once you download do the following in order
- Unzip file and click on folder
- open it in a separate window
- if you dont have any modification made copy each folders (fontconfig.ini) to match the folders in your sd card
- next click on the setting folder and add the 3x files located there to the setting folder of your sd card and override the current sd card files.
once completed reload battery or hold power down button to reboot and upgrade.
***PLEASE NOTE WE NOR ANY VENDOR WILL PROVIDE FILES OF FONTS IF YOU DID NOT PURCHASE FROM US OR THEM IF YOU LOSE YOUR FILES CONTACT YOJR PURCHASED VENDOR FOR THEM WE WILL NOT SHARE SOUND FONTS NOT PURCHASED WITH A XNO PRODUCT.
latest firmware bug fix stable must update to v1.2.0 first then proceed to update to v1.2.5 if firmware is below v1.2.0
* Stabilizes blade effects
* Improves sound quality and custom fonts
+added save state
do not factory reset. download file and add to the setting folder overwrite any file you have there for update.bin finally remove battery and let the update run. you can also update via the app xeno configurator. this is for manual upload.
link below
https://drive.google.com/file/d/1YXIgLof3wgHqQuQxnCe_6_2SUSv-aFG4/view?usp=drive_link
latest firmware bug fix stable must update to v1.2.0 first then proceed to update to v1.2.5
* Stabilizes blade effects
* Improves sound quality and custom fonts
do not factory reset. download file and add to the setting folder overwrite any file you have there for update.bin finally remove battery and let the update run. you can also update via the app xeno configurator. this is for manual upload.
link below
https://drive.google.com/file/d/1eEOeWdha-X9CoaVjZGQ1Qer82pZ-I2CC/view?usp=drive_link
below is a list of files supported on the xeno3rgb and pixel sound board ensure it's in this format? and that all files are included in the .font.txt for proper reading?
begindrag (1).wav
beginlock (1).wav
beginmelt (1).wav
blaster (1).wav
clash (1).wav
drag (1).wav
enddrag (1).wav
endlock (1).wav
endmelt (1).wav
font (1).wav
force (1).wav
hum (1).wav
in (1).wav
lock (1).wav
melt (1).wav
out (1).wav
spin (1).wav
stab (1).wav
swing (1).wav
swingh (1).wav
swingl (1).wav
track (1).wav
lightningblock (1).wav
preon (1).wav
postoff (1).wav
prein (1).wav
sideout (1).wav
beginlightingblock (1).wav
endlightingblock (1).wav
Download and replace the melt files in each folder of your board
Link below
https://drive.google.com/file/d/1fuZseZxnncL0crbIvQLRukYsJQwLN9Ai/view?usp=sharing
Copy these files to each folder if dont have them to activate lightining block feature
Link below
https://drive.google.com/file/d/1E1pqllBc7EsF3Vb2znG_c-g3YnuNIncQ/view?usp=drive_link
This update helps with the rgb board version bug where leds get stuck or you had uploaded manually wrong firmware add file to setting folder and reboot
https://drive.google.com/file/d/15WJE-p-KEZhW_YfDXjl_E6CWAJ9IGxAv/view?usp=drivesdk
Update now avaliable for download on the bluetooth xeno configurator app
Regarding the Xenov3 pixel only update v1.2.0 on the app below is the bugs and new togglez/addon its not a major update but address few prior exisiting bugs
- adding ability to solder 2 buttons (on rgb also)
- toggle on or off bluetooth function (on rgb also)
- added ability for smoothswing sensitivity adjustment (rgb also)
- added ability to wire a motor crystal chamber (rgb also)
- fixed the config.tmp major bug (rgb also)
- added Deep Sleep Time adjustment (rgb also)
- added pixel to rgb toggle
Image image for wiring rotating crystal motor
XENO3RGB
https://drive.google.com/file/d/14qTmQ7iWgJTiRGrA6le2K7zzQl5YiUi5/view?usp=drive_link
XENO3PIXEL
https://drive.google.com/file/d/1C6rs5xZW2U2rNB8yrgE-ZhePHClfpo5z/view?usp=drive_link
This is the xeno3 Setting default folder you can download this folder if your SD card goes corrupt, we do not provide fonts as we do not share unless your a darkwolfsabers.com xeno3 customer. if you purchased from another vendor, we recommend reaching out for their font selection. otherwise this is the operating system you can create folders 1-34 as numbers per folder then add maybe free xeno3 fonts. Click link below for system setting folder.
https://drive.google.com/file/d/1d5sgcsmrGrMXZIdvn0IwBChwRV98iadw/view?usp=drive_link
download unzip then click into the folder to access the setting then add it to the main directory once done reload the battery. recommended card is a 16gb no higher
we also recommend connecting to the app the board has embedded 16 fonts you can add to the xeno configurator via bluetooth and update to the latest firmware
Artist, Title, Genre etc... will be removed during conversion.
https://www.soundfontnamingconverter.com
https://buymeacoffee.com/brianconner
Copyright © 2022 Darkwolf Sabers LLC - All Rights Reserved.
Powered by GoDaddy Website Builder
IMPORTANT NOTICE
Please Read FAQ for Current Processing Time as well as important Messages.
Note: None RTS (Ready to ship items) processing time frame is back to normal
Any exclusive models or stocked electronics will process next business day. please keep this in mind.
Thank you for your support.
link to latest news.
https://darkwolfsabers.com/important-site-news