7/8th LOW PROFILE PIXEL / LED PINS CONNECTOR (usa only)
$23.75
Low Profile Pixel / LED Pins Connector for compatible 7/8-inch thin-neck saber projects. The compact design supports reduced blade connection depth; verify dimensions and wiring before purchase.
Model Number: a204-2
Description
Low Profile Pixel / LED Connector for Thin-Neck Sabers
The Low Profile Pixel / LED Pins Connector is a compact component for compatible 7/8-inch lightsaber projects. Its design helps reduce the depth needed for a blade connection. As a result, it may be helpful when building or repairing a thin-neck hilt with limited space at the emitter.
This connector uses quick-connect extension pins intended for compatible pixel or LED arrangements. Therefore, it offers an option for hobbyists who are planning a custom project or replacing worn hardware. However, connector styles and wiring requirements vary, so check the rest of your setup before purchasing.
Low Profile Pixel Connector Features
- Compact size: Designed to reduce connection depth in suitable builds.
- Quick-connect pins: Intended for practical engagement with matching hardware.
- 7/8-inch application: Designed for compatible smaller-diameter setups.
- Thin-neck use: Helpful when available blade seating depth is limited.
- Replacement projects: Suitable for some custom saber maintenance jobs.
Check Your Pixel or LED Setup
First, measure the available space in your emitter. Next, compare the Low Profile Pixel connector with the physical dimensions of your current component. Then, review your electronics and blade contact design. These steps matter because not every pixel connector or LED fitting uses the same wiring arrangement.
For a thin-neck saber, the right connector can make a compact build easier to plan. Even so, a shared blade diameter does not guarantee compatibility. The mating parts must align correctly, and the system’s electrical requirements must also match. If you are uncertain about the hardware, consult a qualified saber technician.
Installation and Care
Disconnect the power before you inspect or install electronic components. Also, avoid bending pins or forcing a connector into place. Once the parts are fitted correctly, inspect the physical connection carefully before normal operation. Routine care helps protect small contact surfaces.
Related Pixel Components
This Low Profile Pixel / LED Pins Connector is a standalone part, not a complete blade or lightsaber. The listing specifies USA-only availability.
For a separate electronic part, compare the V3 PCB for Wolf Pixel Blade. Then, browse the DarkWolfSabers store for other lightsaber components. Choose this low-profile connector only after confirming its dimensions and required contact layout.
Additional information
| Weight | .2 lbs |
|---|---|
| Dimensions | 7 × 5 × 1 in |
| Size Option | 1in, 7/8th |
1 review for 7/8th LOW PROFILE PIXEL / LED PINS CONNECTOR (usa only)
Only logged in customers who have purchased this product may leave a review.
1 review for 7/8th LOW PROFILE PIXEL / LED PINS CONNECTOR (usa only)
Only logged in customers who have purchased this product may leave a review.
8 Font Ecopixel Functions Guide
Xeno3 Pixel and RGB Support
Golden Harvest V4
Soundboard Board Voice Packs
Xenopixel v2 Support
RGBX Support
RGBX 12 Font Support
Golden Harvest Support
Proffie v2.2 Support Page
Proffie OS 8.10 Function
Proffie OS7.13 Function








johnoppel1994 (verified owner) –
This is a good replacement part for the Exile Nobi Lightsaber hilt and the Obi Wan SE hilt.